Improve cutting ability and create cleaner cuts with the air-assist system. The system mounts inside the Emblaser Core and is fully software controlled, allowing it to be automatically activated as needed....

The workspace camera displays your workspace directly within LightBurn. This simplifies material alignment and allows you to use the Scan & Trace feature to import your designs directly from artwork....

Protective eyewear for the Emblaser Core.Warning: This protective eyewear is specifically chosen to protect against the type of laser used in the Emblaser. Other eyewear may not be suitable.Features 190-540nm...

Free Freight Australia Wide Use you Emblaser indoors without needing to vent fumes out through a window. The Filter system is very quiet and uses a set of filters containing...

The Emblaser 2 and Emblaser Core requires very little ongoing maintenance, but like any equipment, over time parts can wear.This maintenance kit contains the all the parts needed to give...

Specially designed for laser cutting, these mats help reduce the underside marring of materials as well as protect your Emblaser’s base plate.The cutting mats are made from a resilient silicon...

Upgrade your Emblaser laser cutter and engraver and take it to the next level with the new Darkly Labs 10W Laser Unit. This new, upgraded laser unit has been designed...

The Emblaser Cutting Tray is provides superior cutting results on any material and is compatible with the Emblaser 2, Emblaser Core & Emblaser 1-A3. Features The Honeycomb tray covers the...

With a protective rating of OD7+, the LaserPair Eye Protection offer 10x the protection over OD6 rated eyewear.  Features 200-540nm laser wavelength protection OD7+, CE Certified Comfortable, wearable over glasses...

A rotary add-on for you FLUX Beamo CO2 Laser Cutter & Engraver allowing you to engrave circular objects. Engrave objects fron 8mm to 90mm. This add-on serves as an extended...

Use the Rotary Add-On with the FLUX Beambox and FLUX Beambox Pro Laser Cutter & Engravers to engrave on to cylindrical objects up to 8cm in width. How to install

Use the Rotary Add-On with the FLUX Hexa Laser Cutter & Engraver to engrave on to cylindrical objects up to 8cm in width.How to install

A filtration unit designed for use with the Flux range of Laser cutters & engravers. Features Automatic Filtering Connect the BeamAir to any FLUX laser cutter using a USB cable...

This is a replacement 5W Diode Module for the Emblaser 2 & Core.  Contents Replacement Diode Module in protective case. Replacement collimation lens. Pre-coated with thermal paste.   Update Emblaser...

A replacement indoor fume filtration filter for the Emblaser 2 - Indoor Fume Filtration Unit F2000 Contains Replacement activated carbon / HEPA filter cartridge Replacement pre-filter

Contents Replacement activated carbon / HEPA filter cartridge. Replacement pre-filter.

Improve cutting ability and create cleaner cuts with the air-assist system. The system mounts inside the Emblaser 2 and is fully software controlled, allowing it to be automatically activated as...

A replacement 110/240V AC to 12VDC power adaptor for the Emblaser2 or Emblaser Core Laser Cutter and Engraver with an AU Power Cable.

A replacement fire blanket for your Emblaser 2 or Emblaser Core Laser Cutter and Engraver. Also usable with the Makeblock Laserbox 40W CO2 Laser Cutter and Engraver. Should a material...

A replacement activated charcoal filter for your FLUX Beamair Filtration Unit. This filter is one of the middle filters and third of four to go in the filtration unit and...

A replacement HEPA filter for your FLUX Beamair Filtration Unit. This filter is the bottom filter and last of four to go in the filtration unit and should be replaced...

Never worry about focusing your FLUX Beamo lens again. The Beamo Autofocus Module will do all the cocusing automatically. When combined with the FLUX Rotary Add-On for Beamo the object...

Lubricating oil for your FLUX Laser Cutter & Engraver. Used to lubricate the axis of your laser cutter.

A replacement 30W laser tube for your FLUX Beamo CO2 Laser Cutter & Engraver.