CR Clarke Sheet Press R30

Form chipped plastic into new sheets of material ready for use! The R30 Sheet Press converts granulated thermoplastic material into a usable form using heat pressure. As standard, the formed article is a flat plastic sheet, which can be typically used for vacuum forming, laser cutting and line bending.

A removable material cassette is loaded with granules of the material to be pressed. The cassette is then loaded into the R30 sheet press, and clamped firmly between two temperature comtrolled aluminium hotplates. The heat and pressure causes the material granules to soften and fuse. At the end of the pressing cycle, the material cassette is unloaded and allowed to cool. The formed sheet of material can then be removed and used.

As standard, the R30 produces a sheet size that is suitable for use on our 725FLB Vacuum Former. Other sizes of material can be produced using separately available heating trays.

Specifications

• Voltage: 240V 50-60Hz
• Max Current: 8 Amps
• Standard Panel Size: 457 x 254 mm
• Average Panel Thickness: 2-3mm
• Average Time to Produce a Sheet: 10 mins
• Dimensions: 690 x 510 x 620 mm
• Weight: 92kg
• Weight (Shipping): 111kg