Flashforge VDS Filament Dryer
- Dual Independent Chambers: Customise drying temperatures for different materials.
- Efficient, Even Drying: Up to 85°C heating with 360° hot air circulation.
- Smart Moisture Control: Automatic humidity management with reusable desiccant.
- Wide Compatibility: Works with all Flashforge printers and a wide range of filament types.
Keep your filament dry, protected and ready to print with the Flashforge VDS (Ventilated Drying System). Designed to improve 3D printing reliability and print quality, the VDS combines intelligent filament drying, automatic humidity management and convenient storage in one powerful system.
Features
Dual Independent Drying ChambersDry up to four filament spools simultaneously at the same temperature, or dry two spools at a different temperature to suit different filament types. |
 |
 |
360° Hot Air CirculationEnsures even and consistent drying throughout each filament spool. |
Maximum Drying PerformanceDrying temperatures of up to 85°C ensure fast, thorough and effective moisture removal. |
 |
 |
Enhanced SafetyDual overheat protection provides additional peace of mind during high-temperature drying. |
Intelligent Humidity ManagementAutomatically monitors humidity and activates moisture removal when required. |
 |
 |
Reusable DesiccantHelps maintain a dry storage environment and can be regenerated for repeated use. |
Smart ControlControl locally on the device or remotely through a creator 5 series 3D printer. |
 |
 |
Wide Filament CompatibilitySupports PLA, PETG, ABS, TPU, PA, PC and fibre-reinforced materials. |
Printer CompatibilityDesigned to work with all Flashforge 3D printers, making it a versatile addition to your printing workflow. |
 |
Contents
- 1x VDS
- 1x Power Cord
- 4x Dessicant Packs
- 1x 4-Pin Connection Cable
- 4x PTFE Tubes
- Dimensions: 400 x 281 x 248 mm
- Compatible Spool Size: Diameter ≤ 202 mm; Width ≤ 72 mm
- Compatible Filament Diameter: 1.75 mm | 2.85 mm supported through the upper filament outlet only
- Temperature Range: 45° – 85°C
- Continuous Drying Time: 1 - 48 hours
- Power Input: 100 – 120V | 200 – 240V AC, 50–60 Hz
- Maximum Power: 500W
Which filaments does the VDS support for drying?
VDS supports drying all 3D printing filaments compatible with the Creator 5 series, including PLA, PETG, ABS, ASA, PA, PAHT, PC, PVA, PP, TPU, and various fiber-reinforced filaments. For best results, please set the drying temperature according to the filament manufacturer's recommendations. VDS efficiently dries filaments that require temperatures up to 85°C. Filaments requiring higher temperatures can also be dried, but longer drying times may be necessary.
Can the VDS dry filament while printing?
For optimal print quality, we recommend drying the filament thoroughly before printing. While VDS supports simultaneous drying and printing, drying times vary by filament type. Please refer to the User Guide or the filament manufacturer's recommendations for specific drying guidelines
Can the VDS supply filament to multiple printers at the same time?
Yes, but a single VDS can only communicate with one Creator 5 series printer at a time.
Can the VDS communicate with other Flashforge printers like the Adventurer 5M or AD5X?
Currently, VDS only supports communication and coordinated operation with the Creator 5 series printers. Other printer models do not support communication with VDS. However, VDS can also be used as a standalone unit. Its drying and dehumidifying functions can be used locally without connecting to a printer, making it compatible with other printer models as well.
Is the VDS noisy during operation?
VDS operates at a noise level below 50 dB.
How much clearance space is required around the VDS?
Leave at least 300mm of clearance above the unit, 100mm on the left side, and 50mm at the rear.
What are the input/output voltages for the VDS? Does it support 110-220V?
It features a wide-range power supply and supports 110-220V.
Does the VDS support longer filament guide tubes?
Yes. VDS comes standard with short guide tubes. If you need to keep the filament dry throughout the entire path, you can purchase long guide tubes separately. These should be used together with the dedicated tube clips for secure installation. For details, please refer to the Wiki.
What is the difference between the two filament outlets on the back of the VDS?
The outlet behind the top cover is specifically designed for TPU and carbon fiber-type filaments. The lower outlet is better suited for rigid materials like PLA, PETG, and ABS.