Includes 5 colours: red, yellow, blue, green, white. 2 sizes: 3mm 40 pices per colour and 5mm 20 pieces per colour Specifications Rated Voltage (V) Red Yellow Blue Green White 5mm...

This 2022 edition of "3D Printing Failures - How to Diagnose & Repair All 3D Printing Issues" has been re-written and contains 10 entirely new chapters. Get in-depth guidance on...

This Polyimide (also known as Kapton) Tape is great for covering your build platform or providing electrical insultation. ABS stick to this when hot (with a heated bed), but releases...

The 3V Piezo Buzzer is a high-performance buzzer with pin terminal/lead, low frequency tone, 70dB sound level and 2kHz resonant frequency. It features extremely low power consumption, high sound pressure...

This great little adaptor lets you change the orientation of your BBC micro:bit from horizontal to vertical, or vice versa. The design is very compact so it can fit in...

This great little adaptor lets you change the orientation of your BBC micro:bit from horizontal to vertical, or vice versa. This version (Reverse, Red colour) turns the micro:bit away from...

This neat little board allows you to easily prototype small circuits on your BBC micro:bit. The BBC micro:bit is attached using the pre-soldered edge connector.

The Bit:2:Pi enables you to re-use all those hundreds of Raspberry Pi addon boards and HATs. Simply plug your Micro:Bit into the edge connector and the required Raspberry Pi Hat...

The Bit:2:Pi enables you to re-use all those hundreds of Raspberry Pi addon boards and HATs. Simply plug your micro:bit into the edge connector and the required Raspberry Pi Hat...

This nifty little, and extremely thin, PCB allows you to connect a pen to the back of your Bit:Bot.  Only 0.4mm thin, so it is very flexible, allowing it to...

The Talon accessory allows you to control the opening of the jaw using standard servo code in Makecode for the Microbit. We have also added specific code to the BitBot...

Introducing the all-new BitBot Pro, the newest version of the beloved BitBot! It features an advanced on-board processor for precise motor control and sensor resolution of 100+ pulses per centimeter,...

This product has been superceded by the 4tronix Bit:Bot Pro Robot for BBC micro:bit and is no longer available. Introducing BitBot V2, taking the much-loved BitBot to the next level....

Suggested Uses Acting as a remote control for another micro:bit device, such as a Bit:Bot Acting as a self-contained portable (no wires) games console Experimenting with various Digital and Analog...

The 4tronix BitFace Breakout does NOT include a 4tronix Bit:Bot XL. The 4tronix Bit:Bot XL will need to be purchased separately here. This breakout is designed to fit on BitBot...

This cute little xmas tree is designed to simply plug into the Music Box MK2 base unit (not included) either way round. It contains 10 FireLeds. All the LEDs are...

Magical RGB Cubes of Awesome. Lovingly hand-woven from pure Rainbow by Unicorns (ed: suspicion of hyperbole). With many thanks for @LMcUnderwood for inspiring the product with her enormous Cubert 8x8x8...

A great Base for your Cube:Bit allowing easy connection of power and signal and directly able to plug in Micro:Bit or Raspberry Pi Zero. These bases have been especially designed...

This affordable, ready-assembled robotics controller board is ready to accept your BBC Micro:Bit, battery power (6 to 10V) and motors of your choice to make your own DIY robot. Use...

A lightweight, wearable Microbit unit with emotive face, 4 buttons, 9 FireLeds and ultrasonic distance sensor.Fully supported with a Makecode extension which also enables the 9 Fireleds to act as...

This breakout is designed to fit on BitBot XL and MiniBit. Brighten up your robot, animate its personality and provide status indications! It provides a 5x5 array of FireLeds giving...

The 4tronix M.A.R.S. Rover is loosely based on the Curiosity and Mars 2020 rovers from NASA/JPL. It uses the same rocker arm, bogey and differential arm mechanism. 4tronix M.A.R.S. Rover...

The 4tronix M.A.R.S. Rover is loosely based on the Curiosity and Mars 2020 rovers from NASA/JPL. It uses the same rocker arm, bogey and differential arm mechanism. Contents The kit...

The Minibit is the younger sibling of the popular and well-loved Bit:Bot. It comes ready-built (wheels need pushing on, and the pen holder top part can be screwed on if...