DF Robot FireBeetle ESP32 IoT Microcontroller
The DF Robot FireBeetle ESP32 is a low-power consumption microcontroller intentionally designed for IOT projects. The microcontroller integrates a Dual-Core ESP-WROOM-32 module, which supports MCU and Wi-Fi &Bluetooth dual-mode communication. The electric...
The DF Robot FireBeetle ESP32 is a low-power consumption microcontroller intentionally designed for IOT projects. The microcontroller integrates a Dual-Core ESP-WROOM-32 module, which supports MCU and Wi-Fi &Bluetooth dual-mode communication.
The electric current is just 10μA when in deep-sleep mode. The main controller supports two power supply methods: USB and 3.7V external lithium battery. And both USB and external DC can charge the Lipo battery directly.
A special hardware design for Arduino IDE has been made for the firebeetle esp32. You can also make a download without switching boot-mode manually. It supports Arduino, IDF (linux), micropython etc. Moreover, FireBeetle made a pin mapping for Arduino IDE. It can be configured with Dx transport, compatible with arduino UNO and reduce the entry barrier.
Benefits
- Low-power consumption
- Quick Response (the top frequency is 400KHz)
- Cost-effective
- Small size, convenient to install
- Working voltage: 3.3V
- Input voltage: 3.3V~5V
- Support electric current of low power consumption: 10 μA
- Support maximum discharge current: 600mA
- Support maximum charge current: 500mA
- Support USB charging
- Processer: Tensilica LX6 dual core processer (One for high speed connection; one for independent programing)
- Frequency: 240MHz
- SRAM: 520KB
- Flash: 16MB
- Wi-Fi standard: FCC/CE/TELEC/KCC
- Wi-Fi protocol: 802.11 b/g/n/d/e/I/k/r (802.11n, high speed can reach to 150 Mbps), converge A-MPDU and A-MSDU, supporting 0.4us protecting interval.
- Frequency range: 2.4~2.5 GHz
- Bluetooth protocol: Comply with BR/EDR/BLE standard of Bluetooth v4.2.
- Bluetooth audio: the current under low power consumption of CVSD and SBC is 10μA
- Working current: 80mA in average
- Frequency range: 2.4~2.5GHz
- Support one-key downloading
- Support micropython
- On-chip clock: 40MHz crystal and 32.768 KHz crystal.
- Digital I/O: 10 (default setting of arduino)
- Simulative input: 5 (default setting of arduino)
- SPI: 1 (default setting of arduino)
- I2C: 1 (default setting of arduino)
- I2S: 1 (default setting of arduino)
- Built-IN LED: 9
- Interface: FireBeetle series compatible
- Working temperature: -40℃~+85℃
- Dimension: 29 × 58 mm / 1.142 x 2.283 in
- The dimension of mounting hole: inner diameter 3.1mm; outside diameter 6mm.