Flashforge Creator 5 Pro 3D Printer
- 4 Toolhead Change Multi-Material Printing
- Minimal Purge Waste Multi-Colour Printing
- 320°C Nozzles & 65°C Active Heated Chamber
- Auto Leveling
- Max Speed 600mm/s
- Max Acceleration 30000mm/s²
Special Pre-Order Pricing valid until May 31st 2026.
Meet the Flashforge Creator 5 Pro — a powerful fully enclosed 4 tool-changer 3D printer engineered for fast, efficient multi-colour and multi-material printing. Designed to deliver high-quality, complex models with minimal material waste, it brings precision, speed, and versatility to every print.
Features
Zero Purge Waste During Material Switching
Up to 500% Faster Multi-Colour Printing
Automatic Multi-Toolhead Offset Calibration
Flawless Surfaces, Enabled by Auto-Compensation
Safe, Quiet, and Stable Printing
The fully enclosed design protects you, your printer, and those around you—including children and pets—while minimizing fumes and lowering noise levels from 65dB to 55dB. It also maintains a stable temperature, helping produce smoother layers and consistently high-quality prints.
65° Active Chamber Heating
A 65 °C actively heated chamber prevents warping and cracking in materials like ABS, ASA, PC, and PA, delivering precise dimensional accuracy.
Multiple Material Types in One Print
Speed up your workflow by integrating multiple material properties into a single, seamless print instead of printing separate parts.
Cooling Mode
Pulls in cool air to rapidly lower the enclosure temperature. Ideal for PLA, TPU, PETG, and PLA-CF, enabling warp-free printing even with the door closed.
Top-Tier Air Purification
Creator 5 Pro features H13 HEPA (medical-grade) filtration and high-quality coconut carbon which effectively removes dust and VOCs emitted by ABS, ASA, and nylon materials.
Contents
- 1x Creator 5 Pro 3D Printer
- 1x Top Cover Lid
- 4x Top Cover Joints
- 4x Top Cover Side Panels
- 1x 4 Extruder Dock Module
- 4x 10g PLA Sample Filament
- 1x Power Cord
- 1x Display Screen
- 4x Spool Holders
- 4x Nozzle Blockers
- Allen Key Set
- Grease
- Various Screws
- Quick Start Guide
- Extruder Quantity: 4x Independent Extruders
- Nozzle Diamter: 0.4mm (installed) | 0.6mm | 0.8mm | 0.25mm (purchased separately)
- Max Extruder Temp: 320°C
- Max Platform Temp: 120°C
- Active Chamber Heating: 65°C
- Max Travel Speed: 600mm/s
- Acceleration Speed: 30,000mm/s²
- Compatible Filament: PLA | PETG | TPU | PLA-CF | PETG-CF | PET-CF | ABS | ASA | PA-CF | PAHT-CF | ABS-CF | PC | PA | PC/ABS | PPS-CF
- Build Volume: 256 x 256 x 256 mm
- Layer Thickness: 0.05-0.4 mm
- Print Precision: ±0.2 mm
Mechanical & Dimensions
- Printer Dimensions: 520 x 443 x 710 (Including spool holders & guide tubes)
- Screen: 4 inch touch screen
- Power Supply: AC100-120V/200~240V, 50/60Hz
- Max Power: 1200W
- Weight: 14kg
Others
- Connectivity: USB | Wi-Fi
- Software: OrcaSlicer | Flash Studio
- Input File Types: 3MF | STL | OBJ | FPP | BMP | PNG | JPG | JPEG File
- Output File Types: 3mf | Gcode
- Camera: Yes
- Timelapse Video: Yes
- Replaceable Print Bed: Yes
- Build Plate Type: Textured PEI
- Operating Temperature: 10-30°C
- Auto Leveling: Yes
- Air Filtration: Yes, HEPA 13 & Activated Carbon
- Auto Shutdown: Yes
- Auto Multi-Extruder Offset Calibration: Yes
- Vibration Compensation: Yes
- Dynamic Flow Calibration: Yes
- Filament Runout Sensor: Yes
- Power Loss Recovery: Yes
- Nozzle Clog Detection: Yes
- Filament Tangle Detection: Yes
- Spaghetti Detection: Expandable
- Quick Swap Nozzle: Yes
- Extruder Pickup Error Detection: Yes
- Door Sensor: Yes
Creator Pro Packs & Bundles
Does the Creator 5 pro support automatic filament loading into the extruder?
The Creator 5 uses a direct-drive extrusion system and does not have an automatic loading mechanism. Filament needs to be fed manually through the filament inlet (shown below) and guided through the tube into the extruder.
How do you unload filament on the Creator 5 pro?
The extruder assembly includes a cutter. Press the lever on the extruder head to cut the filament, then manually pull the filament out from the insertion end.
Is leveling required after replacing the nozzle?
Yes. We recommend running auto leveling after any nozzle change to compensate for tiny installation variances and ensure optimal print quality.
What do I do if the screen shows only folders and no print files after inserting the USB flash drive?
The USB flash drive is not formatted correctly. The device supports the FAT32 file system. Please reformat your USB flash drive to FAT32.
How do you remove the nozzle assembly?
Remove the two silver screws on the extruder head then pinch the silicone sock and pull the nozzle assembly out.
When should multi-extruder offset calibration be run and how long does it take?
Perform multi-extruder offset calibration in the following situations:
- First time printer setup
- After replacing a hotend
- If the nozzle collides with the bed or a model
- If during multi-color/multi-filament printing the colours aren't aligned
The calibration process takes approximately 15-20 minutes.
How much clearance space is required around the Creator 5 pro?
At least 10mm on the left and rear, 200mm on the right, and 500mm at the front.
Does Creator 5 pro support multi-color printing without a prime tower?
Disabling the prime tower is not recommended. While the Creator 5 pro eliminates "purging" during filament switches, minor filament oozing may still occur. The prime tower cleans the nozzle before each filament switch and at the start of printing, ensuring the nozzle remains clean.
Does the Creator 5 pro still support the FlashCloud or Polar Cloud?
FlashCloud has been discontinued. It now adopts a new cloud service with app-based account binding. Polar Cloud is no longer supported due to its slow speed and low user base.
Flashforge Creator 5 Pro: 4 Colour 3D Printing Made Practical!