The Makeblock mBot Variety Pack contains 6 add-on cases for the mBot V1.1 and 2 for the mBot Ranger, this pack enriches the motion control and appearance relative to your robots.
- Include 5 types of mechanical parts in professional grade aluminum alloy
- Come with 5 electronic parts, e.g. a servo and an RGB LED module
- More playful ways to code and learn with mBot and mBot Ranger
This robot car can detect and then avoid the front obstacles through its two micro switches.
Constructed with an RGB LED module and a servo, this traffic barrier gate remains closed when the light turns red and lifts when the green light is on.
Apart from counting time, this gadget can also be used to create fun projects together with mBlock stage.
Bridging the servo and a long beam together on the mBot, you can program the servo to rotate the beam in a range. It’s no doubt a funny way for your robot to adorably mimic a cat waving its little paws!
Connecting the servo to the ultrasonic sensor, your mBot now acts like a robot cat shaking its head to locate where you are.
Attached the servo to the back of your mBot and connected to the RGB LED module, this way your robot looks like a cat with a blinking tail.
Make use of the onboard light sensors in Me Auriga, this smart sunflower can imitate real-life solar tracking.
Thanks to the onboard gyroscope sensor, you can swing this magic stick to change its color. Otherwise, press on the micro switch for the same effect.
- 1x RJ25 Adapter Module
- 2x Micro Switch Bs
- 2x Cuttable Linkages
- 2x 45º Plates
- 20x M4 x 8mm Screws
- 12x M4 nuts
- 1x RGB LED Module
- 1x 9g Micro Servo Pack
- 2x Plate I1
- 2x 120º 3 x 3 Brackets
- 12x M4 x 14mm Screws
- 10x Plastic Spacers (4x7x3mm)
- 1x Segment Serial Display
- 4x RJ25 Cables
- 2x Brackets (3x3)
- 4x M4 x 25mm Brass Studs
- 4x M4 x 22mm Screws
- 1x 5mm + 7mm Wrench